Furuno FAR-2107 Series Service Manual page 567

2. Minimum range and
range discrimination
3. Range scales (nm),
ring interval
4. Range accuracy
5. Bearing discrimination
6. Bearing accuracy
7. Presentation mode
8. Plotting facilities
(ARPA or ATA)
9. Radar map
10. Guard zone
11. Parallel index line
12. AIS
13. Chart cards
4. INTERFACE
1. IEC 61162-1 Ed. 2
2. Compass
3. Speed log
4. Others
5. PERFORMANCE MONITOR
PM-31 (X-band)
1. Frequency range
2. Input power
3. Power output (2nd pulse max output)
4. Power output (2nd pulse min output)
5. Steps levels (1st pulse to 2nd pulse)
Minimum range: 20 m w/raw video + 0-2 m w/digitize error
Range discrimination: 20 m w/raw video + 0-6 m w/digitize
error
0.125 (.025), 0.25 (0.05), 0.5 (0.1), 0.75 (0.25),
1 (0.25)*, 1.5 (0.25),
2 (0.5)*, 3 (0.5), 4 (1)*, 6 (1), 8 (2)*, 12 (2), 16 (4)*,
24 (4), 32 (8)*, 48(8), 96 (16), 120 (20)* *: Non-IMO type
only
Within 1%
0.95° (XN4A), 0.75° (XN5A), 2.1° (XN12AF),
1.5° (XN20AF), 1.2°(XN24AF), 2.5° (SN30AF),
2.0° (SN36AF)
±1°
Head-up, Head-up TB, North-up, Course-up, True
Motion sea or ground stabilization
Auto or Manual acquisition: 100 targets in 0.1-32 nm
Auto tracking on all acquired targets
Nav lines, coastlines, buoys, etc. produced by operator.
20,000 pts in radar mode, 6000 pts on IC card in chart
mode
GZ1: 0.5 nm width sector, within 3-6 nm, desired bearing
GZ2: 1 nm width sector or polygon, desired range and bearing
Choice of 2, 4 or 6 lines
IMO SN Circ.217, IEC/PAS 60936-5
FURUNO and NAVIONICS
RSD, TTM, AIS related data, etc.
Built-in interface (option) for sync signal (20-135 V,
50-400 Hz), or stepper signal (20-135 VDC), any polarity,
for gyrocompass, GPS compass SC-60/120 by IEC 61162-2
NMEA format data
Echo sounder, GPS navigator, water temperature, etc.
9365 to 9455 MHz
Min. +8 dBm, Max. +28 dBm
-36 dBm
-56 dBm
9.0 to 11.0 dB
AP2-3
Appendix 2) Specifications