Furuno FAR-2107 Series Service Manual page 100

[Specifications changed by 3.04]
Detail of change is described in paragraph 1.1 and thereafter.
Change of Screen and arrangement of Data box
Background color (see paragraph 1.1)
Character Font (see 1.2)
Data Box arrangement (see 1.3)
Anchor watch screen is added. (see 1.4)
Alarm list screen is added. (see 2)
Inter switch screen is added. (see 3)
Change of Terms
"ARPA" is replaced by "TT" (Target Track).
"GZ" is replaced by "TT" (Acquisition Zone).
"IL" is replaced by "PI" (Parallel Index-line)
"CONNING" position is replaced by "CCRP" (Consistent Common Reference Point).
Change of Marks
Own ship mark is changed.
Anchor watch mark is available in IMO mode.
Drop mark is added.
AIS symbol is changed.
TT symbol is changed.
Change of Menu and functions
See paragraph 4.
Detail of change
1.1 Default of brilliance differs among Day, Dusk and Night. 6 colors are provided in the
brilliance menu and 4 colors are switchable by BRILL box. To lessen the brilliance level
difference between background and characters, all menu boxes has background color
(Day-Green and Day- red menu box has gray background color).
1.2 Character font is changed so as to obtain the necessary viewing distance (1200 mm for
MU231CR) of character.
1.3 Data box positions of REF POINT, SET DRIFT and WATCH boxes are moved. Drop
mark and Data boxes are added at the bottom of screen.
available by all radar types.
range/bearing or X-Y range to cursor (switchable).
1.4 Anchor watch screen is added.
ANCHOR WACH mode is standard.
Upper box displays cursor L/L, and lower box displays
Three modes, RADAR, RADAR+PLOTTER and
Two cursor data box is
2/16