Furuno FAR-2107 Series Service Manual page 244

7 [OPERATION]
9 CUSTOMIZE/
TEST
8 [TEST]
Allows specifying the Wheel-Direction and Key-Beep.
And
4 REMOTE KEY:
- F*-KEY: Normal operation for functions of the
remote control unit
- DISPLAY SELECT: When connected with the
network, [F1] to [F4] keys on the Remote Control
unit are assigned as [ANT X] toggling keys.
5 POP UP GUIDANCE:
When the cursor is placed on a box icon, the trackball
stops moving and a pop-up message shows the
contents of the icon.
6 OWN SHIP VECTOR:
Allows selecting the display of the own ship vector
(Heading or Course)
7 STERN UP:
A picture is rotated by 180 degrees so as to face the
stern upward on the screen.
8 SHATTLE FERRY: see the next page
The HDG value is added by 180 degrees so as to face
the stern upward on the screen, and the picture is also
turned by 180 degrees.
9 [DUAL RADAR]:
The image from both X-band and S-band radars
(connected with LAN) may be shown together
(Combine or Mix) on one radar display.
This function is not displayed on the IMO type.
SELF TEST:
Displays the program versions, key test and the serial
input data.
ARPA TEST:
Allow checking ARPA functions with echoes created by
CPU. During the execution, "XX" is displayed in the
display. To terminate, set it to ST-BY. If ARPA test is
executed, the ARPA track is cancelled.
3-34
3.3 Main Menu Tree