Safety Requirements - UNI-T UTS3000B/A Series User Manual

CAT IV
Certificati
on
Certificati
on
Certificati
on
Waste
EEUP

Safety Requirements

Warning
Please connect this device to AC power supply with the power cable provided;
The AC input voltage of the line reaches the rated value of this device. See the
Preparation
product manual for specific rated value.
before use
The line voltage switch of this device matches the line voltage;
The line voltage of the line fuse of this device is correct.
Check all Please check all rated values and marking instructions on the product to avoid fire
terminal rated and impact of excessive current. Please consult the product manual for detailed
values rated values before connection.
and circuit between the distribution board and the socket (three-phase
distributor circuit includes a single commercial lighting circuit). Fixed
equipment, such as multi-phase motor and multi-phase fuse box; lighting
equipment and lines inside large buildings; machine tools and power
distribution boards at industrial sites (workshops).
Three-phase public power unit and outdoor power supply line equipment.
Equipment designed to "initial connection", such as power distribution system
of power station, power instrument, front-end overload protection, and any
outdoor transmission line.
CE indicates a registered trademark of EU.
UKCA indicates a registered trademark of United Kingdom.
ETL indicates a registered trademark of Intertek.
This product complies with the marking requirements of WEEE Directive
(2002/96/EC). This additional label indicates that this electrical / electronic
product must not be discarded in household waste.
This environment-friendly use period (EFUP) mark indicates that dangerous
or toxic substances will not leak or cause damage within this indicated time
period. The environment-friendly use period of this product is 40 years, during
which it can be used safely. Upon expiration of this period, it should enter the
recycling system.
15 / 78