Table of Contents
Advertisement
User's Manual
a) Any repair damage caused by the installation, repair, or maintenance of the product by non UNI-T service
representatives.
b) Any repair damage caused by improper use or connection to an incompatible device.
c) Any damage or malfunction caused by the use of a power source which does not conform to the requirements
of this manual.
d) Any maintenance on altered or integrated products (if such alteration or integration leads to an increase in
time or difficulty of product maintenance).
This warranty is written by UNI-T for this product, and it is used to substitute any other express or implied
warranties. UNI-T and its distributors do not offer any implied warranties for merchant ability or applicability
purposes.
For violation of this guarantee, regardless of whether UNI-T and its distributors are informed that any indirect,
special, incidental, or consequential damage may occur, UNI-T and its distributors shall not be responsible for any
of the damages.
Safety Instructions
To avoid possible electric shock and personal safety problem, please follow the instructions below. Uni-Trend will
not be responsible for the personal safety and property damage caused by the user's failure to comply with the
following terms.
1. Do not use the damaged instrument. Before using, please check the outer shell whether has crack or plastic
lack. Do not use the instrument in flammable and explosive gas, steam or dusty environment.
2. Only trained personnel can execute maintain procedure to avoid fire and personal injury; there must be
personnel supervision in use, otherwise it should be turned off the instrument and its power supply.
3. Before connecting the instrument, observe all marks on the instrument to learn more about the rated value,
warnings and notices.
4. The power supply of the instrument is 100-240VAC, 50/60Hz.
5. The instrument is equipped with three core power cord, only use the power cord provided by the
manufacturer to avoid accidental injury; do not plug and unplug the power cord when the instrument is
energizing; do not put other objects on the power cable when using it, and ensure that the power cable is
away from heat source.
6. Instrument grounding：To prevent the risk of electric shock, please connect the power ground wire.
7. Do not install substitutes or perform unauthorized changes; do not use the instrument when the outer shell
opened or looseness.
8. During the test, do not touch terminal blocks and test line to prevent from electric shock; do not plug the
communication port; do not put article on the instrument to protect the instrument, especially pay attention
Instruments.uni-trend.com
UTE9800+ Series Smart Digital Power Meter
3 / 55
Advertisement
Table of Contents
