User Interface - UNI-T UTS3000B/A Series User Manual

User Interface

1. Working mode: RF analysis, vector signal analysis, EMI, analog demodulation.
2. Sweep/Measuring: Single / continuous sweep, tap the screen symbol to quick step through the
mode.
3. Measuring bar: Display the measurement information which includes input impedance, input
attenuation, presetting, correction, trigger type, reference frequency, average type, and
average/hold. Touch screen sign to quick switch these mode.
4. Trace Indicator: Display the trace line and detector message which includes number of trace line,
trace type and detector type.
Note
The first line is display the number of trace line, color of number and trace should be the same. The
second line is display the corresponding trace type which includes W (Clear/Write), A (Average), M (Max
Hold), m (Min Hold). The third line is display detector type which including S (sample), P (Peak), p
(Negative), N (Normal), A (Average), and f (trace operation). Detection types are displayed in white
letters.
Tap screen sign to quick switch different modes, different letter presents different mode：

Letter in highlight white color, it presents the trace is being update;

Letter in grey color, it presents the trace is not update;

Letter in grey color with strikethrough, it presents the trace will not be update and display；

Letter in white color with strikethrough, it presents the trace is being update but no display; this
case is useful for trace mathematical operation.
Figure 1-2 User Interface
8 / 78