Basic Measurement - UNI-T UTS3000B/A Series User Manual

Basic Measurement

In this manual, key marked with [ ], such as [FREQ], [AMPT] and [Marker] are physical keys on the
front panel. In most cases, press one of this hard key to enter a function menu, this menu will display on
the right of the screen, such as center frequency and reference level. And these are called panel
menus.
Key on Front Panel
This section is to introduce how to use the basic function.
Input Data
There are common ways to input and edit data
Rotary Knob
Direction Key
Numeric Key
Virtual key
Enter Key
Use Panel Menu
Press panel menu (vertical permutation on the right of the screen) to enter the
corresponding function item, the following are examples of panel menu
Switch
Sub-menu
Selection
Correction
Increase or decrease the current numerical value
Increase or decrease the current numerical value
Input numerical value and confirm (select a virtual key unit or
[Enter] key)
Touch panel menu to pop out dialog box, and then touch virtual
key to input numerical value and confirm (select a virtual key
"ENTER" or [Enter] key)
If input numerical value without unit or user want to use the
default unit to be the unit for this numerical value, press [Enter]
key as the termination key for this numerical value.
Press this panel menu to switch two modes of parameter
Press this panel menu to enter sub-menu
Tap menu selection to change data, the selected menu will be
highlight
Double click the parameter that need to change to pop out
the modification menu, or select the data menu that need to
change and then press Enter key to modify it
22 / 78