UNI-T UTS3000B/A Series User Manual page 58

Date/Time: touch this area to pop out the setting dialog box, swipe the numeric up and down to modify
it. After the setting, touch "√" to confirm it and close the setting dialog box.
Picture Format: set the format of screenshot, it has bmp and png for selection.
Power On: set the system parameter settings that are loaded after power on, it has default, last and
preset for selection.
Backlight: swipe the scroll bar to change the backlight of the screen.
Volume: swipe the scroll bar to change the sound.
HDMI Output: HD multimedia interface, touch "□" to tick it, it indicates the interface is turned on.
Screenshot Inverse: Set the inverse color of screenshot.
User Preset: When the power-on parameter is set to preset, this configuration file will use to set the
parameter when the instrument is turned on.
Shutdown Confirmation: after the shutdown confirmation box is selected, a confirmation dialog box will
pop out.
2. Network
Adapter: that is LAN switch, touch "□"to tick it, it indicates the interface is enabled.
DHCP: touch "□" to tick it, it indicates automatic acquire the network configuration. If no tick it, it
indicates manual setting.
IPv4 Address: the format of IP address is nnn.nnn.nnn.nnn, the first nnn range is 1 to 223, and the
other three nnn range is 0 to 255. It is recommended to consult network administrator for an available
IP address.
IP Mask: the format of subnet mask is nnn.nnn.nnn.nnn, nnn range is 0 to 255. It is recommended to
consult network administrator for an available subnet mask address.
Gateway: the format of gateway is nnn.nnn.nnn.nnn, the first nnn range is 1 to 255, and the other
three nnn range is 0 to 255. It is recommended to consult network administrator for an available
gateway address.
MAC Address: physical address to confirm the location of a network device which is also called
hardware address, the length is 48bits (6 bytes). It consists of hexadecimal digits, including the first 24
digits and the last 24 digits, in the format of XX-XX-XX-XX-XX-XX. The first 24 bits are called
organization-unique identifiers, while the last 24 bits are assigned by the manufacturer and called
extended identifiers.
Restore Defaults: enter restore default menu to perform this function.
1.Setup: Restore the system setting, the system setting of the spectrum analyzer will restore to the
default state.
2. Data:Clear data, all the stored data of the spectrum analyzer will be delete.
3. All:Restore all the setting, all the setting of the spectrum analyzer will restore to the default state.
58 / 78