General Safety Instructions - UNI-T UT-P40 Instruction Manual

General Safety Instructions:

Read the following safety instructions to avoid injury
and prevent damage to this product or any products
connected to it. Use this product only as specified.
Only qualified personnel should perform service
procedures.
To Avoid Fire or Personal Injury
Connect and Disconnect Properly.
Connect the probe output to the measurement instrument
before connecting the probe to the circuit under test.
Disconnect the probe input and the probe ground from
the circuit under test before disconnecting the probe
from the measurement Instrument.
Observe All Terminal Ratings.
To avoid fire or shock hazard, observe all rating and
markings on the product. Consult the instruction manual
for further ratings information before making
connections to the product.
Replace Batteries Properly.
Replace batteries only with the proper type and rating
specified.
Do Not Operate Without Covers.
11