UNI-T UTS3000B/A Series User Manual page 54

4. ->Stop: Set the stop frequency of the spectrum analyzer to the frequency of the cursor.
 When "Normal" cursor is selected, the stop frequency is set to the frequency of the current cursor.
 When "Difference" cursor is selected, the stop frequency is set to the frequency of the difference
cursor.

In zero span mode, this function is not work.
5. ->Ref Lvl: Set the reference level of the spectrum analyzer to the amplitude of the valid marker, and
move the marker point to the reference level (top of the grid).
 When "Normal" cursor is selected, set the marker amplitude of the spectrum analyzer to the
amplitude of the current reference level.
When "Difference" cursor is selected, set reference level to the amplitude difference between

markers.
Marker Table: Turn on/off marker Table
When the marker Table is opened, all open cursors are displayed as a Table in the window of the split
screen. The display includes cursor number, marker mode, marked trace number, X-axis scale type,
X-axis reading and amplitude. The cursor table can be used to view the measurement values of multiple
measurement points.
4-2
Figure Marker List
54 / 78