Table of Contents
Advertisement
Search Criteria: Threshold line, peak threshold and peak offset.
1. Threshold Line （On/Off） : Set whether to display the peak threshold and peak offset indicator line. The
default setting is off.
2. Threshold（Man/Auto）: Specify the minimum of peak amplitude by manual or auto. Only peak
greater than the peak threshold can be judged as the peak. User can change the threshold by using
the number key, rotary knob, direction key or touch panel menu.
3. Excursion （Man/Auto） : Specify the difference between the peak and the minimum amplitude of the left
and right side. The peak can be judged as the peak only the difference value is greater than the peak
offset. User can change the threshold by using the number key, rotary knob, direction key or touch
panel menu.
Save
Press [Save] key to access save menu, the types of files that can be saved in the instrument are state,
trace + state, measurement data, limit, correction and Save. Long press this key to screenshot.
State: Press State panel menu to access state save menu. Save the state into the instrument.
1. Press Save key, the instrument will save the current state by the default file name or the input file
name.
2. After the state file is selected, press Recall key to read the current state file.
Trace + State: Press Trace + State panel menu to access trace and state save menu. Save the
instrument state and selected trace to a file.
Trace Selection: there are six traces for selection.
1. Press Save key, the instrument will save the current state and trace by the default file name or the
input file name.
2. After the trace and state file is selected, press Recall key to read the current trace and state files.
Figure 4-3 Peak List
56 / 78
Advertisement
Table of Contents
