Safety Requirements - UNI-T UTL8200+ Series User Manual

User's Manual
warranties. UNI-T and its distributors do not offer any implied warranties for merchant ability or applicability
purposes.
For violation of this guarantee, regardless of whether UNI-T and its distributors are informed that any
indirect, special, incidental, or consequential damage may occur, UNI-T and its distributors shall not be
responsible for any of the damages.
Trademark
UNI-T is the registered trademark of Uni-Trend Technology (China) Co., Ltd.
Statement
UNI-T products are protected by patent rights in China and foreign countries, including issued and

pending patents.
UNI-T reserves the rights to any product specification and pricing changes.

UNI-T reserves all rights. Licensed software products are properties of Uni-Trend and its subsidiaries

or suppliers, which are protected by national copyright laws and international treaty provisions.
Information in this manual supersedes all previously published versions.
1. Introduction
This manual includes safety requirements, installment and the operation of UTL8200+ DC electronic load.

2. Safety Requirements

This section contains information and warnings that must be followed to keep the instrument operating
under safety conditions. In addition, user should also follow the common safety procedures.
Safety Precautions
Warning
Instruments.uni-trend.com
Please follow the following guidelines to avoid possible electric shock and risk to
personal safety.
UTL8200+ Series DC Electronic Load
3 / 33