Table of Contents
Advertisement
User's Manual
Certificatio
Certificatio
Certificatio
Safety Requirements
Warning
Preparation
before use
Check all
terminal rated
values
Use the power
cord properly
Instruments.uni-trend.com
Equipment designed to "initial connection", such as power distribution system
of power station, power instrument, front-end overload protection, and any
outdoor transmission line.
CE indicates a registered trademark of EU.
n
UKCA indicates a registered trademark of United Kingdom.
n
Conforms to UL STD 61010-1, 61010-2-030, Certified to CSA STD C22.2 No.
61010-1, 61010-2-030.
n
Do not place equipment and its accessories in the trash. Items must be properly
Waste
disposed of in accordance with local regulations.
This environment-friendly use period (EFUP) mark indicates that dangerous or
toxic substances will not leak or cause damage within this indicated time
period. The environment-friendly use period of this product is 40 years, during
EEUP
which it can be used safely. Upon expiration of this period, it should enter the
recycling system.
Please connect this device to AC power supply with the power cable provided;
The AC input voltage of the line reaches the rated value of this device. See the product
manual for specific rated value.
The line voltage switch of this device matches the line voltage;
The line voltage of the line fuse of this device is correct.
Do not used to measure MAINS CIRCUIT.
Please check all rated values and marking instructions on the product to avoid fire and
impact of excessive current. Please consult the product manual for detailed rated
values before connection.
You can only use the special power cord for the instrument approved by the local and
state standards. Please check whether the insulation layer of the cord is damaged or
the cord is exposed, and test whether the cord is conductive. If the cord is damaged,
UTS1000B/ T Series
15 / 76
Advertisement
Table of Contents
