Table of Contents
Advertisement
Do not
operate in
Do not use this device in a flammable and explosive environment to avoid product
flammable
damage or personal injury.
and explosive
environment
Caution
If this device may be faulty, please contact the authorized maintenance personnel of
Abnormity
UNI-T for testing. Any maintenance, adjustment or parts replacement must be done
by the relevant personnel of UNI-T.
Do not block the ventilation holes at the side and back of this device;
Do not allow any external objects to enter this device via ventilation holes;
Cooling
Please ensure adequate ventilation, and leave a gap of at least 15 cm on both sides,
front and back of this device.
Safe
Please transport this device safely to prevent it from sliding, which may damage the
buttons, knobs or interfaces on the instrument panel.
transportation
Poor ventilation will cause the device temperature to rise, thus causing damage to
Proper
this device. Please keep proper ventilation during use, and regularly check the vents
ventilation
and fans.
Keep clean
Please take actions to avoid dust or moisture in the air affecting the performance of
and dry
this device. Please keep the product surface clean and dry.
Note
The recommended calibration period is one year. Calibration should only be carried
Calibration
out by qualified personnel.
17 / 78
Advertisement
Table of Contents
