Mercedes-Benz GLC 200 4MATIC Owner's Manual page 98

Requirements:
The power supply or the vehicle has been
R
switched on.
1
Closing
2
Opening
The buttons on the driver's door take precedence.
To start automatic operation: press the W
#
button beyond the point of resistance or pull
and release it.
To interrupt automatic operation: press or pull
#
the W button again.
When the vehicle is switched off, you can con-
tinue to operate the side windows.
The function is also available until the doors are
closed again.
Automatic reversing function of the side windows
If an obstacle impedes a side window during the
closing process, the side window will open again
automatically. The automatic reversing function is
only an aid and is not a substitute for your atten-
tiveness.
During the closing process, make sure that no
#
body parts are in the closing area.
Opening and closing
& WARNING Risk of becoming trapped
despite there being reversing protection
on the side window
The reversing function does not react:
to soft, light and thin objects, e.g. fingers.
R
during resetting.
R
The reversing function cannot prevent some-
one from becoming trapped in these situa-
tions.
During the closing process, make sure
#
that no body parts are in the closing
area.
If someone becomes trapped, press the
#
W button to open the side window
again.
Automatic function of the side windows
In the following cases, the side windows will be
closed automatically when the vehicle is switched
off:
if it starts to rain
R
95