Mercedes-Benz GLC 200 4MATIC Owner's Manual page 157

154 Light and sight
° Continuous wiping, slow
4
¯ Continuous wiping, fast
5
Turn the combination switch to the corre-
#
sponding position 1 - 5.
Single wipe/washing: push the button on the
#
combination switch in the direction of arrow
1.
í Single wipe
R
î Wipes with washer fluid
R
%
Observe the notes on washing the vehicle in a
car wash ( page 390).
/
Switching the rear window wiper on/off
1 ô Single wipe/washing
2 è Intermittent wiping
Single wipe: press button 1
#
point of resistance.
Wiping with washer fluid: press button
#
beyond the point of resistance.
Switching intermittent wiping on/off: press
#
button 2.
The è symbol will appear on the driver's
display when the rear window wiper is
switched on.
Replacing the windscreen wiper blades
& WARNING Risk of becoming trapped if the
windscreen wipers are switched on while
wiper blades are being replaced
If the windscreen wipers begin to move while
you are changing the wiper blades, you can be
trapped by the wiper arm.
Always switch off the windscreen wipers
#
and vehicle before changing the wiper
blades.
Moving the wiper arms into the replacement posi-
tion
as far as the
Switch the vehicle on and then off again
#
immediately.
1