Mercedes-Benz GLC 200 4MATIC Owner's Manual page 279

276 Driving and parking
Setting the warning threshold
This value determines the speed at which a warn-
ing is issued when exceeded.
Set the desired speed under
#
old.
%
This function is an on-demand feature
( page 22).
/
Traffic light view
▌Information about the traffic light view
The traffic light view supports the driver when
waiting in front of a red light by displaying the
camera image on the central display. The camera
image is displayed when the driver is the first vehi-
cle in front of the red light and faded out when the
vehicle drives off.
▌Displaying traffic light view
Requirements:
The Traffic light view option is switched on .
R
A traffic light view is available.
R
Multimedia system:
©
4
Assistance
5
Warning thresh-
%
This function is not available in all countries.
If the vehicle is in first position at a traffic light,
the camera image with traffic light view is shown
on the central display.
When the vehicle pulls away, the camera image is
faded out.
Activate D or deactivate E
#
light view.
Using other available functions
Select Z.
#
Select
#
If On request
available, the
view. message is displayed. The camera image
is shown after confirmation of the message.
When Automatic
automatically displayed when the traffic light
view is available.
Settings Assistance
5 5
Traffic light view
5
Traffic
On request or Automatic.
is set and a traffic light view is
Please tap here for traffic light
is set, the camera image is
Blind Spot Assist and Active Blind Spot Assist
▌Function of Blind Spot Assist and Active Blind
Spot Assist with exit warning
Blind Spot Assist and Active Blind Spot Assist use
radar sensors to monitor the area up to 40 m
behind and 3 m next to your vehicle.
The system can detect vehicles travelling from
speeds of approximately 12 km/h and issue a
warning if they move into the monitoring range.
Status display in the driver's display
¸ Grey: the system is activated but inopera-
tive.
¸ Green: the system is activated and opera-
tional.