Mercedes-Benz GLC 200 4MATIC Owner's Manual page 115

112 Seats and stowing
Push both release knobs 1
#
same time in the direction of the arrow and
pull out the head restraint.
Fold the rear seat backrest back until it
#
engages.
Fitting
Release the rear seat backrest and fold it for-
#
wards slightly ( page 124).
/
Insert the head restraint such that the notches
#
on the bar are on the left when viewed in the
direction of travel.
Push the head restraint down until it engages.
#
Fold the rear seat backrest back until it
#
engages.
Configuring the seat settings
Multimedia system:
© Comfort Seat
4 5 5
Adjusting the air cushions
In the corresponding menu, adjust the air
#
cushions for Lumbar or Side
and 2 at the Setting the seat heating balance
Select
#
Select
#
Adjust the heat distribution for the desired
#
seat.
Setting automatic seat adjustment
& WARNING Risk of becoming trapped dur-
ing adjustment of the driver's seat after
calling up a driver profile
Selecting a user profile may trigger an adjust-
ment of the driver's seat to the position saved
under the user profile. You or other vehicle
occupants could be injured in the process.
Make sure that when the position of the
#
driver's seat is being adjusted via the
multimedia system, no people or body
parts are in the seat's range of move-
ment.
bolsters.
Heating settings.
Seat heating balance.
If there is a risk of someone becoming trap-
ped, stop the adjustment process immedi-
ately:
a) Tap the warning message on the cen-
#
tral display.
or
b) Press a memory function position but-
#
ton or a seat adjustment switch on the
driver's door.
The adjustment process will be stopped.
Multimedia system:
© Comfort Seat
4 5 5
Position seat automatically
5
Manually adjusting driver's seat and steering
wheel position to body size
The vehicle calculates a suitable driver's seat and
steering wheel position on the basis of the driver's
body size and sets this directly.
To set the unit of measurement: select
#
ft/in.
Set the size using the scale.
#
cm or