Mercedes-Benz GLC 200 4MATIC Owner's Manual page 72

O The child restraint system must not be put
under strain between the roof and the seat
cushion and/or be fitted facing in the wrong
direction. Where possible, adjust the seat
cushion inclination accordingly.
O The child restraint system must not be put
under strain by the head restraint. Adjust the
head restraints as appropriate.
° When fitting an i‑Size child restraint system,
also observe the following:
O When using a rearward-facing child restraint
system: adjust the front seat so that it does
not touch the child restraint system.
O When using a forward-facing child restraint
system: remove the head restraint from the
respective seat, if possible. In addition, the
backrest of the child restraint system must
lie as flat as possible against the backrest of
the vehicle seat.
After the child restraint system has been
removed, replace the head restraint immedi-
ately and adjust all head restraints correctly.
1 ISOFIX mounting bracket
2
i‑Size mounting bracket
Before every journey, make sure that the ISOFIX
child restraint system or the i‑Size child restraint
system is engaged correctly in both mounting
brackets in the vehicle.
Occupant safety
* NOTE Damage to the seat belt for the
centre seat during installation of the child
restraint system
Make sure that the seat belt is not trap-
#
ped.
Attach the ISOFIX or i‑Size child restraint sys-
#
tem to both mounting brackets in the vehicle.
Fastening a Top Tether
& WARNING Risk of injury or death if the
rear seat backrests are not locked after
Top Tether belts are fitted
The rear seat backrests may fold forwards
when you are driving.
As a result, child restraint systems will no lon-
ger be able to perform their intended protec-
tive function. This may also cause additional
injuries.
Always lock rear seat backrests after fit-
#
ting Top Tether belts.
69