Mercedes-Benz GLC 200 4MATIC Owner's Manual page 395

392 Maintenance and care
Vehicles with 360° camera: the front image
R
will be deactivated at speeds above 18 km/h.
Vehicles with HANDS-FREE ACCESS: kick rec-
R
ognition will be activated.
Activating/deactivating automatic car wash mode
Requirements:
The vehicle is stationary.
R
The vehicle is switched on.
R
Multimedia system:
© Settings Vehicle
4 5 5
Activating automatic car wash mode
Select Car wash mode.
#
Select Activate.
#
If one of the settings cannot be selected, this is
shown by a % next to the respective setting.
%
For an overview of the settings made when
activating automatic car wash mode
( page 390).
/
Deactivating automatic car wash mode
Select Deactivate.
#
The automatic car wash settings are reset.
%
The automatic car wash mode is automatically
deactivated as soon as a speed of 20 km/h is
exceeded.
Information on using a high-pressure cleaner
& WARNING Risk of an accident when using
high-pressure cleaners with round-spray
nozzles
Driving
5
The water jet can cause externally invisible
damage.
Components damaged in this way may unex-
pectedly fail.
Do not use a high-pressure cleaner with
#
round-spray nozzles.
Have damaged tyres or chassis parts
#
replaced immediately.
To avoid damage to your vehicle, observe the fol-
lowing when using a high-pressure cleaner:
The key is at a minimum distance of 3 m away
R
from the vehicle. Otherwise, the tailgate could
open unintentionally.
Maintain a distance of at least 30 cm to the
R
vehicle.
Vehicles with decorative foils: Parts of your
R
vehicle are covered with a decorative foil.
Maintain a distance of at least 70 cm between
the foil-covered parts of the vehicle and the
nozzle of the high-pressure cleaner. Move the
high-pressure cleaner nozzle around whilst
cleaning. The water temperature of the high-
pressure cleaner must not exceed 60°C.
Observe the information on the correct dis-
R
tance in the equipment manufacturer's oper-
ating instructions.
Do not direct the nozzle of the high-pressure
R
cleaner directly at sensitive parts, e.g. tyres,
gaps, electrical components, batteries, illumi-
nants or louvres.