Mercedes-Benz GLC 200 4MATIC Owner's Manual page 451

448 Technical data
Engine oil specification (diesel engines)
Model MB-Freigabe or MB-
All models 229.52, 229.61,
229.71, 229.72
1) Recommended for the lowest possible fuel consumption (lowest
SAE viscosity class in each case; observe possible restrictions of
the approved SAE viscosity classes)
To achieve the lowest possible fuel consumption,
it is recommended to use the engine oil specifica-
tions marked in the table for the lowest SAE vis-
cosity class. Observe any possible restrictions of
the approved SAE viscosity classes.
%
If the engine oils listed in the table are not
available, you may add a maximum of 1.0 litre
of the following engine oils once only.
Vehicles with petrol engines: MB-Freigabe or
MB-Approval 229.31 or ACEA C3
Vehicles with diesel engines: ACEA C3
Not for plug-in hybrid:
Engine oil filling capacity
Model
Approval
All models
The specified filling capacity refers to an oil
1)
change with the oil filter.
Plug-in hybrid
Engine oil specification (plug-in hybrid)
Model
GLC 300 de 4MATIC
All other models
1) Use only SAE 0W-40 viscosity class engine oils.
To achieve the lowest possible fuel consumption,
it is recommended to use the engine oil specifica-
tions marked in the table for the lowest SAE vis-
cosity class. Observe any possible restrictions of
the approved SAE viscosity classes.
Capacity
6.0 litres
MB-Freigabe or MB-
Approval
229.52
229.51, 229.52
1)
%
If the engine oils listed in the table are not
available, you may add a maximum of 1.0 litre
of the following engine oils once only.
Petrol: MB-Freigabe or MB-Approval 229.31
or ACEA C3
Diesel: ACEA C3
Engine oil filling capacity (plug-in hybrid)
Model
GLC 300 de 4MATIC
All other models
The specified filling capacity refers to an oil
change with the oil filter.
Notes on brake fluid
Observe the notes on operating fluids
( page 441).
/
Capacity
6.0 litres
5.3 litres