Mercedes-Benz GLC 200 4MATIC Owner's Manual page 181

178 Driving and parking
components have been modified or dam-
aged.
Never touch damaged components of
#
the high-voltage on-board electrical sys-
tem.
After an accident, do not touch any com-
#
ponents of the high-voltage on-board
electrical system.
After an accident, have the vehicle trans-
#
ported away.
Have the components of the high-voltage
#
on-board electrical system checked at a
qualified specialist workshop and
replaced if necessary.
Requirements:
Only disconnect the high-voltage on-board electri-
cal system manually in the following situations:
The 6 restraint system warning lamp lights
R
up in the driver's display, e.g. after an acci-
dent.
The vehicle is badly damaged, e.g. after an
R
accident, and the restraint system compo-
nents have not been triggered.
Operating the high-voltage disconnect device
Switch off the vehicle.
#
Shift the transmission to position j.
#
Apply the electric parking brake.
#
Secure the vehicle against rolling away.
#
Open the bonnet.
#
Press release tab 1 in the direction of the
#
arrow and pull it out.
Pull high-voltage disconnect device
#
direction of the arrow until it engages.
The high-voltage on-board electrical system is
switched off.
All work on the hybrid drive system (including
after disconnecting the high-voltage on-board
electrical system manually) may only be carried
out in a qualified specialist workshop.
2 in the