Entering & Exiting The Program Menu; Moving Through The Menus - Honeywell Silent Knight IntelliKnight 5820XL Installation And Operation Manual

6.4.1 Entering & Exiting the Program Menu
To enter Program Mode:
1. Enter the Installer Code (factory programmed default code is 5820).
2. The display prompts you to press the
6-7).
3. Then press . The menu option displays. See Section 7 for detailed menu information and
7
Section 6.5 for a quick reference listing all programmable options and JumpStart defaults.
To exit Program Mode:
When you have completed working with the menus, press
you are exited from programming mode. Two prompts will display. The first prompt is to
make sure you intended to leave the Program Menu (select Yes or No as appropriate). The
second prompt is for accepting all changes. If you select No, any changes you have made
since you entered the Program Menu will have no effect.

6.4.1.1 Moving through the Menus

Figure 6-8 shows how to move through Program Menu screens, using the System Options
screen as an example.
151209
or
Figure 6-7 Keypad Enabled Screen
Figure 6-8 Moving through Program Menu
(System Options Sub-Menu Used as an Example)
firealarmresources.com
Programming Overview
key to bring up the Main Menu (see Figure
(left arrow) several times until
6-11