Using The Sd500-Arm Addressable Relay Module - Honeywell Silent Knight IntelliKnight 5820XL Installation And Operation Manual

4.15.4 Using the SD500-ARM Addressable Relay Module

When the SD500-ARM is wired for polarity reversal, it reports alarm and trouble events to a
remote site. Alarms will override trouble conditions and it will not be possible to reset the
remote indicator until the condition is cleared and the control panel is reset.
Wire the SD500-ARM as shown in Figure 4-44.
UL Listed
Model 7642
Must be installed
in City Box enclosure
Figure 4-44 Polarity Reversal Connection Using the SD500-ARM Module
151209
To City Box
firealarmresources.com
Control Panel Installation
1 kΩ
Intended for Connection to a
Polarity Reversal Circuit of A
Remote Station Receiving Unit
Having Compatible Rating.
4-45