Table of Contents
Advertisement
eight output groups.
To create Output Group Templates:
1. From the Main Menu, select
2. From the Program Menu, select
3. At the next screen, select
4. Select the template number (01 - 08).
5. Select output group number. See Figure 7-9.
Output
Group #
Select the
Cadence Pattern
Figure 7-9 Output Group Template Programming Screen
7.5
Point
You may need to change characteristics of individual input points (detectors and switches)
even after using JumpStart. This section explains how to change options for: type of input
point; latching/non-latching status (switches); and name and zone assignment of a point.
7.5.1
Point Programming For 5815XL Module
To program for an 5815XL Module points, follow these steps:
1. Enter the installer code.
2. Press
to display the main menu.
or
3. Select
for Program Menu.
7
Display reads:
4. Press
to enter point menu.
4
5. Press the
or
ence Table for available choices.
6. Press
.
7. Enter the number of the point you wish to edit.
151209
for Program Menu.
7
for Group.
3
for Edit OPG Template.
5
Initializing
Please wait . . .
arrows to select the desired module. Refer to Section 6.5 Quick Refer-
firealarmresources.com
Programming
Yes = Include the selected
output group in this template
No = Do Not include output
group in this template
7-19
Advertisement
Table of Contents
Troubleshooting
