Two-Wire Smoke Detectors - Honeywell Silent Knight IntelliKnight 5820XL Installation And Operation Manual

IntelliKnight 5820XL Installation Manual
A.3 Two-Wire Smoke Detectors
Table A-2 lists two-wire smoke detectors that are compatible with the fire control panel. The
table is organized by manufacturer. The columns show the number of detectors per loop that
can be used.
Note: The maximum number of smoke detectors per zone is determined by both the current draw and the imped-
ance of the smoke detector. If too many smoke detectors are used on any zone, false alarms could occur.
Do not mix different models of detectors on any zone; false alarms could occur.
Do not mix detectors of different models unless the system is specifically intended to be installed in that
configuration.
Control unit Smoke Reset Time must be programmed for a number greater than or equal to the maximum
reset time of the smoke detector.
Manufacturer (Base model name or number
55000-350 (45681-200)
Apollo
55000-250 (45681-200)
429C (S10A)
429CRT (S11A)
429CST (S11A)
429CT (S10A)
609U01-11
609U02-11
611U (601U or 602U)
611UD (601U or 602U)
ESL 611UT (601U or 602U)
612U (601U or 602U)
612UD (601U or 602U)
711U (701E or 701U)
712U (701E or 701U)
713-5U (702E or 701U)
713-6U (702E or 701U)
721-U (S10A)
721-UT (S10A)
525
Falcon
525T
A-12
Table 1-1:
Identifier
Operating Voltage Range
Table A-2: Compatible Two-Wire Smoke Detectors
Model Name or Number
in parentheses.)
firealarmresources.com
5820XL
24H
18.5–27.4 VDC
Compatibility ID
Head Base
55000-350 45681-200
55000-250 45681-200
N/A S10A
N/A S11A
N/A S11A
N/A S10A
S10 S00
S10 S00/S03
S10 S00/S03
S10 S00/S03
S10 S00/S03
S10 S00/S03
S10 S00/S03
N/A S10A
N/A S10A
N/A S10A
N/A S10A
N/A S10A
N/A S10A
FDT1 N/A
FDT1 N/A
# per Loop
24 / loop
24 / loop
30 / loop
30 / loop
30 / loop
30 / loop
40 / loop
40 / loop
40 / loop
40 / loop
40 / loop
40 / loop
40 / loop
25 / loop
25 / loop
25 / loop
25 / loop
30 / loop
30 / loop
17 / loop
17 / loop
151209