Assigning A Name To Points; System Options - Honeywell Silent Knight IntelliKnight 5820XL Installation And Operation Manual

14. Repeat Steps 1 through 13 for all points.

7.5.3.1 Assigning a Name to Points

You can assign a name to a point to make it easier to recognize on a display.
To edit a point name:
1. Do steps 1 through 4 in Section 7.5.3.
2. Using the or
3. Enter the point number.
4. Press until the module name is blinking.
5. Press .
A screen similar to the one shown in Figure 7-2 displays.
6. Select the characters for the point name by pressing the
character is shown then press
OR
Enter the Numerical Designator for the character you want, then press
for a list of available characters and their numeric designators.
7. Repeat step 6 until the name is complete.
8. Press when the name is complete.
7.6

System Options

This section of the manual explains how to customize software options that affect general
operation of the system. This includes such items as: AC loss hours, system clock options,
holidays schedule, telephone and reporting account options. Refer to each individual
subsection for complete instructions.
151209
arrow, select the module of the point you want to edit, press
Figure 7-11 Selecting Character for Zone Name
.
firealarmresources.com
Programming
or arrow until the desired
. See Appendix B
.
7-27