IntelliKnight 5820XL Installation Manual
7.5.2
Point Programming For Internal or External Power
Module (5895XL)
To program for an internal or external power module points:
1. Enter the installer code.
2. Press
to display the main menu.
or
3. Select
for Program Menu.
7
Display reads:
4. Press
to enter point menu.
4
5. Press the
or
choices.
6. Press
.
7. Enter the number of the circuit or point you wish to edit. Refer to Table 7-6 for available
selections.
8. Press
.
9. Select the type by pressing the
10. Press
.
11. Select the function by pressing the
12. Press
.
13. Select the zone by pressing the
14. Press
.
15. Edit point name. See Section 7.5.3.1.
7-24
Initializing
Please wait . . .
arrows to select the desired module. Refer to Section 6.5 for available
or
arrows.
or
or
arrows.
firealarmresources.com
arrows.
151209