Arrivals - Garmin G1000 NXi Pilot's Manual

3) Push the FMS Knob to activate the cursor and turn the FMS Knob to highlight the flight plan to be edited.
4) Press the EDIT Softkey; or press the MENU Key, select 'Edit Flight Plan' and press the ENT Key. The 'FPL –
Stored Flight Plan' Page is displayed.
5) Highlight and remove the departure:
a) Turn the large FMS Knob to highlight the header of the departure.
b) Press the CLR Key. The 'Remove <procedure name> from flight plan?' Window is displayed.
Or :
a) Press the MENU Key to display the 'Page Menu' Window and turn the FMS Knob to highlight 'Remove
Departure'.
b) Press the ENT Key. The 'Remove <procedure name> from flight plan?' Window is displayed.
6) With 'OK' highlighted, press the ENT Key. To cancel the request, press the CLR Key, or highlight 'CANCEL' and
press the ENT Key.
7) Push the FMS Knob to remove the flashing cursor.

ARRIVALS

A Standard Terminal Arrival (STAR) can be loaded at any airport that has one available. Only one arrival can
be loaded at a time in a flight plan. If an arrival is loaded when another arrival is already in the active flight
plan, the new arrival replaces the previous arrival. The route is defined by selection of an arrival, the transition
waypoints, and a runway.
Available Procedure Actions
Loaded Procedures
190-02177-02 Rev. A
Figure 5-66 Arrival Selection
Garmin G1000 NXi Pilot's Guide for the Cessna NAV III
Destination Airport
Arrival Preview Arrival Choices
FLIGHT MANAGEMENT
229