Garmin G1000 NXi Pilot's Manual page 131

Control Name
SPKR/PA
31
Volume/Squelch
32
Indicator
Volume/
Squelch (VOL/
33
SQ) Control
Knob
Cursor (CRSR)
34
Control Knob
Bluetooth
Connection
35
Annunciation
190-02177-02 Rev. A
Press and hold SPKR/PA for 2 seconds to select the PA system. When the PA is
active the annunciation to the right of the SPKR/PA softkey will be illuminated.
The annunciation will flash when PA mode is active and the PTT is pressed.
Indicates volume/squelch setting relative to full scale.
Turn the smaller knob to control volume or squelch of the selected source
(indicated by the flashing white or blue annunciation). When the volume
control cursor is not active push to switch to Blue-Select mode. If the volume
control cursor is active, push twice (once to cancel the cursor, twice to activate
Blue-Select mode). Push and hold for five seconds to enable the audio panel
as discoverable for pairing. The Bluetooth Annunciation will flash to indicate
the unit is discoverable. The unit will remain discoverable for 90 seconds or
until a successful pair is established. Once a successful pair is established, the
Bluetooth Annunciation will quit flashing and be a solid blue and the audio
"Bluetooth paired" is played.
Turn to move the cursor (flashing white or blue annunciation) to the desired
source.
A flashing blue annunciation indicates the unit is discoverable. A solid blue
annunciation indicates an active Bluetooth connection.
Garmin G1000 NXi Pilot's Guide for the Cessna NAV III
Description
AUDIO PANEL AND CNS
GMA GMA
1347 1360
X
X
X
X
X
111