Garmin G1000 NXi Pilot's Manual page 266

FLIGHT MANAGEMENT
Selecting waypoints for waypoint mode:
1) From the 'Aux – Trip Planning' Page, press the WPTs Softkey; or press the MENU Key, highlight 'Waypoints
Mode', and press the ENT Key. The cursor is positioned in the waypoint field directly below the FPL Field.
2) Turn the FMS knobs to select the desired waypoint (or select from the Page Menu 'Set WPT to Present Position'
if that is what is desired), and press the ENT Key. The cursor moves to the second waypoint field.
3) Turn the FMS knobs to select the desired waypoint, and press the ENT Key. The statistics for the selected leg
are displayed.
Entering manual data for trip statistics calculations:
1) From the 'Aux – Trip Planning' Page, press the Manual Softkey or select 'Manual Mode' from the Page Menu,
and press the ENT Key. The cursor may now be positioned in any field in the top right two boxes.
2) Turn the FMS Knobs to move the cursor onto the 'Departure Time' Field and enter the desired value. Press the
ENT Key. The statistics are calculated using the new value and the cursor moves to the next entry field. Repeat
until all desired values have been entered.
246
Garmin G1000 NXi Pilot's Guide for the Cessna NAV III
190-02177-02 Rev. A