Garmin G1000 NXi Pilot's Manual page 57

Entering a scheduler message:
1) Select the 'Aux - Utility' Page.
2) Push the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to highlight the first empty field within the 'Scheduler' Box.
4) Use the FMS Knob to enter text within the 'Message' Field to be displayed in the 'Messages' Window and press
the ENT Key.
5) Press the ENT Key again or use the large FMS Knob to move the cursor to the 'Type' Field.
6) Turn the small FMS Knob to select set the message alert type:
• 'Event' — Message issued at the specified date/time
• 'One-time' — Message issued when the message timer reaches zero (default setting)
• 'Periodic' — Message issued each time the message timer reaches zero
7) Press the ENT Key again or use the large FMS Knob to move the cursor to the next field.
8) For periodic and one-time message, use the FMS Knob to enter the timer value (HHH:MM:SS) from which to
countdown and press the ENT Key.
9) For event-based messages:
a) Use the FMS Knob to enter the desired date (DD-MMM-YY) and press the ENT Key.
b) Press the ENT Key again or use the large FMS Knob to move the cursor to the next field.
c) Use the FMS Knob to enter the desired time (HH:MM) and press the ENT Key.
10) Press the ENT Key again or use the large FMS Knob to move the cursor to enter the next message.
Deleting a scheduler message:
1) Select the 'Aux - Utility' Page.
2) Push the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to highlight the 'Message' Field of the scheduler message to be deleted.
4) Press the CLR Key to clear the message text. If the CLR Key is pressed again, the message is restored.
5) Press the ENT Key to confirm message deletion.
190-02177-02 Rev. A
Garmin G1000 NXi Pilot's Guide for the Cessna NAV III
SYSTEM OVERVIEW
37