Garmin G1000 NXi Pilot's Manual page 221

Hide thumbs Also See for G1000 NXi:
Table of Contents

Advertisement

If there are no legs remaining in the flight plan after the given leg, or OBS mode is active. The following
will cancel the parallel track:
» Initiating a direct-to, to a waypoint.
» Initiating a hold at the present position.
» If a course change occurs greater than 120° or the parallel tracks overlap as a result of the course change.
» No legs are remaining in the flight plan after the given leg, or OBS mode is active. Initiating a hold at
a waypoint will result in the aircraft flying the parallel track until a turn is required to fly to the hold
waypoint. If the hold is removed prior to reaching the hold waypoint, the parallel track will be resumed.
Once the holding pattern is active, the parallel track will not be resumed upon exiting the hold.
NOTE: Vertical navigation is unavailable while the Parallel Track feature is active.
Original Track
Parallel Track
190-02177-02 Rev. A
Offset Distance
Figure 5-52 'Parallel Track' Window
Figure 5-53 Parallel Track Active
Garmin G1000 NXi Pilot's Guide for the Cessna NAV III
FLIGHT MANAGEMENT
Offset Direction
Activation Prompt
Parallel Track Waypoints
- TIFTO-p
- TOP-p
- ...
- LAA-p
201

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents