Garmin G1000 NXi Pilot's Manual page 378

HAZARD AVOIDANCE
D a
isplaying DDitional
The 'Map - Traffic Map' Page can display additional information for a selected aircraft symbol. This may
include the aircraft tail number/Flight ID, type of aircraft (e.g., glider, small/medium/large aircraft, service
vehicle, unmanned airborne vehicle (UAV), course, track, groundspeed), and other information.
Showing additional traffic information:
1) Select the 'Map - Traffic Map' Page.
2) Push the FMS Knob. A cyan border appears on the first selected traffic symbol. Additional information appears
in a window in the lower-left corner of the 'Map - Traffic Map' Page.
3) To select a different aircraft symbol, turn the FMS Knob to move the cyan border until another symbol is
selected.
4) When finished, push the FMS Knob again to disable the traffic selection.
'M - t
ap raFFic
The display range on the 'Map - Traffic Map' Page can be changed at any time. Map range is adjustable
with the Joystick, as indicated by the map range rings.
Changing the display range on the 'Map - Traffic Map' Page:
1) Turn the Joystick.
2) The following range options are available:
• 500 feet
500 feet and 1000 feet
•
• 1000 feet and 2000 feet
• 2000 feet and 1 nm
• 1 and 2 nm
2 and 6 nm
•
• 6 and 12 nm
• 12 and 24 nm
• 24 and 40 nm
NOTE: ADS-B traffic can be displayed as an overlay to navigation maps and IFR/VFR Charts. Refer to the
previous TAS discussions for information about these additional traffic displays.
358
t i
raFFic nForMation
M ' p D r
ap age isplay ange
Garmin G1000 NXi Pilot's Guide for the Cessna NAV III 190-02177-02 Rev. A