Garmin G1000 NXi Pilot's Manual page 250

FLIGHT MANAGEMENT
Procedure Loading Page Selection Softkeys
Loading an arrival into the active flight plan using the PROC Key:
1) Press the PROC Key. The 'Procedures' Window is displayed.
2) Highlight 'Select Arrival'.
3) Press the ENT Key. The 'PROC – Arrival Loading' Page is displayed.
4) Use the FMS Knob to select an airport and press the ENT Key.
5) Select an arrival from the list and press the ENT Key.
6) Select a transition (if required) and press the ENT Key.
7) Select a runway (if required) and press the ENT Key. 'Load?' is highlighted.
8) Press the ENT Key to load the arrival procedure.
Loading an arrival into the active flight plan from the 'WPT – Arrival Information' Page:
1) From the 'WPT – Airport Information' Page (first page in the WPT group), press the STAR Softkey. The 'WPT
– Arrival Information' Page is displayed, defaulting to the airport displayed on the 'WPT – Airport Information'
Page.
2) To select another airport, push the FMS Knob to activate the cursor, enter an identifier/facility name/city, and
press the ENT Key.
3) Select a different arrival, if desired.
a) Turn the large FMS Knob to highlight the arrival. The arrival is previewed on the map.
b) Turn the small FMS Knob to view the available arrivals. Press the ENT Key to select the arrival. The cursor
moves to the 'Transition' Box (only if there are available transitions). The arrival is previewed on the map.
230
Selected Arrival
Figure 5-67 Arrival Loading
Garmin G1000 NXi Pilot's Guide for the Cessna NAV III
Loaded Arrival
190-02177-02 Rev. A