Garmin G1000 NXi Pilot's Manual page 427

The chart shown is one associated with the 'Map – Navigation Map' page. Usually this is the airport runway
diagram. Where no runway diagram exists, but Take Off Minimums or Alternate Minimums are available,
that page appears. If Airport Information pages are unavailable, the Approach Chart for the airport is shown.
Selecting a chart:
1) While viewing the 'Map-Navigation Map' Page, 'NRST-Nearest Airport' Page, or 'FPL- Active Flight Plan' Page,
press the Charts Softkey. The airport diagram or approach chart is displayed on the 'WPT-Airport Information'
Page.
2) Push the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to select either the Airport Identifier Box or the Approach Box. (Press the APR Softkey
if the Approach Box is not currently shown).
4) Turn the small and large FMS Knob to enter the desired airport identifier.
5) Press the ENT Key to complete the airport selection.
6) Turn the large FMS Knob to select the Approach Box.
7) Turn the small FMS Knob to show the approach chart selection choices.
8) Turn either FMS Knob to scroll through the available charts.
9) Press the ENT Key to complete the chart selection.
190-02177-02 Rev. A
Figure 8-8 'Approach Information' Page, Chart Selection
Garmin G1000 NXi Pilot's Guide for the Cessna NAV III
ADDITIONAL FEATURES
Select Desired
Approach Chart
from Menu
Chart Scale
407