Electronic Checklists - Garmin G1000 NXi Pilot's Manual

8.12 ELECTRONIC CHECKLISTS

NOTE: The optional checklists presented here are for example only and may differ from checklists available
for the airframe. The information described in this section is not intended to replace the checklist information
described in the current pertinent flight manual or the Pilot Safety and Warning Supplements document.
NOTE: Garmin is not responsible for the content of checklists. Checklists are created by the aircraft
manufacturer. Modifications or updates to the checklists are coordinated through the aircraft manufacturer.
The user cannot edit these checklists.
The MFD is able to display optional electronic checklists which allow a pilot to quickly find the proper procedure
on the ground and during each phase of flight. The system accesses the checklists from an SD card inserted into
the bezel slot. If the SD card contains an invalid checklist file or no checklist, the Power-on Page messages display
'Checklist File: Invalid' or 'Checklist File: N/A' (not available) and the Checklist Softkey is not available.
Accessing and navigating checklists:
1) From any page on the MFD (except the EIS Pages), press the Checklist Softkey or turn the large FMS Knob to
select the Checklist Page.
2) Turn the large FMS Knob to select the 'Group' Field.
3) Turn the small FMS Knob to select the desired procedure and press the ENT Key.
4) Turn the large FMS Knob to select the 'Checklist' Field.
5) Turn the FMS Knob to select the desired checklist and press the ENT Key. The selected checklist item is
indicated with white text surrounded by a white box.
6) Press the ENT Key or Check Softkey to check the selected checklist item. The line item turns green and a
checkmark is placed in the associated box. The next line item is automatically selected for checking.
Either FMS Knob can be used to scroll through the checklist and select the desired checklist item.
Press the CLR Key or Uncheck Softkey to remove a check mark from an item.
7) When all checklist items have been checked, '*Checklist Finished*' is displayed in green text at the bottom left
of the checklist window. If all items in the checklist have not be checked, '*Checklist Not Finished*' will be
displayed in amber text.
8) Press the ENT Key. 'Go To Next Checklist?' will be highlighted by the cursor.
9) Press the ENT Key to advance to the next checklist.
10) Press the Exit Softkey to exit the Checklist Page and return to the page last viewed.
Accessing emergency procedures:
1) From any page on the MFD (except the EIS Pages), press the Checklist Softkey or turn the large FMS Knob to
select the Checklist Page.
2) Press the EMER Softkey.
3) Turn the FMS Knob to select the desired emergency checklist and press the ENT Key.
190-02177-02 Rev. A
Garmin G1000 NXi Pilot's Guide for the Cessna NAV III
ADDITIONAL FEATURES
463