Map - Traffic Map' Page - Garmin G1000 NXi Pilot's Manual

HAZARD AVOIDANCE
Customizing traffic display on the 'Map - Navigation Map' Page:
1) Select the 'Map - Navigation Map' Page.
2) Press the MENU Key.
3) With 'Map Setup' highlighted, press the ENT Key.
4) Turn the small FMS Knob to select the 'Traffic' Group and press the ENT Key.
5) Turn the large FMS Knob or press the ENT Key to scroll through product selections.
• Traffic – Turns the display of traffic data on or off
• Traffic Mode – Selects the traffic mode for display; select from:
- All Traffic - Displays all traffic
- TA Only - Displays Traffic Alerts only
• Traffic Symbols – Selects the maximum range at which traffic symbols are shown
• Traffic Labels – Selects the maximum range at which traffic labels are shown (with the option to turn off)
6) Turn the small FMS Knob to scroll through options for each product (On/Off, range settings, etc.).
7) Press the ENT Key to select an option.
8) Push the FMS Knob or CLR Key to return to the Navigation Map Page with the changed settings.

'MAP - TRAFFIC MAP' PAGE

The 'Map - Traffic Map' Page is specialized to show surrounding TIS traffic data in relation to the aircraft' s
current position and altitude, without clutter from the basemap. Aircraft orientation on this map is always
heading up unless there is no valid heading. Map range is adjustable with the Joystick from 2 to 12 nm, as
indicated by the map range rings.
The traffic mode is annunciated in the upper left corner of the 'Map - Traffic Map' Page. When the aircraft
is on the ground, TIS automatically enters Standby Mode. Once the aircraft is airborne, TIS switches from
Standby to Operating Mode and the system begins to display traffic information. Refer to the System Status
discussion for more information.
Displaying traffic on the 'Map - Traffic Map' Page:
1) Turn the large FMS Knob to select the Map Page Group.
2) Turn the small FMS Knob to select the 'Map - Traffic Map' Page.
3) Confirm TIS is in Operating Mode:
Pr ess the Operate Softkey to begin displaying traffic.
Or :
a) Press the MENU Key.
b) Select 'Operate Mode' (shown if TIS is in Standby Mode) and press the ENT Key.
332 Garmin G1000 NXi Pilot's Guide for the Cessna NAV III 190-02177-02 Rev. A