Garmin G1000 NXi Pilot's Manual page 509

13) When the transfer is complete, the following screen will appear.
14) Press the Close Softkey.
15) Remove and reapply power to the system.
16) Press the ENT Key or the right-most softkey on MFD display to acknowledge the startup screen.
17) Turn the large FMS Knob and select Aux.
18) Turn the small FMS Knob and select Databases.
19) Verify the standby databases transferred and are now in the Active column.
20) To manually activate any databases that did not transfer to the active column:
a) Push the FMS Knob. The first database title on the screen will be selected.
b) Turn the small FMS Knob as necessary to select the database title.
c) Press the ENT Key. A cyan double-sided arrow will appear indicating the standby database will become
active.
Or :
190-02177-02 Rev. A
Figure B-6 Database Transfer Complete
Figure B-7 'Aux Databases' Page with Updated Databases
Garmin G1000 NXi Pilot's Guide for the Cessna NAV III
APPENDIX B
489