From Excel To Stl - Siemens SIMADYN D FM 458 User Manual

4.5.3.4 From Excel to STL

The following sections explain, using examples, how to re-format an
Excel table to obtain the required table format.
The file example, shown in the following diagram, is formatted step-by-
step corresponding to the specifications of the required table format.
Fig. 4-25
(1) Header
Initially, the required header is inserted. To do this, 5 lines are inserted at
the beginning and the following data is entered:
• DATA_BLOCK DB 1 [number of the DB]
• TITLE = [enter as required]
• VERSION : 0.1 [version data]
The Excel table with inserted header is shown in the following diagram:
Application Module FM 458 - User Manual
6DD1904-0AE0 Edition 12.2001
An example of a table in MS Excel
Configuring
4-49