Table of Contents
Advertisement
2. Insert the option module from the rear into the slot cover (
Fig. 2-10
3. Insert the option module from the right into the 64-pin system
4. Using the two screws, screw the option module at the mounting points
5. Screw on the side housing cover.
Application Module FM 458 - User Manual
6DD1904-0AE0
Edition 12.2001
position of the 64-pin connector on the main board lines-up with the
socket.
!
Mounting the option module
connector on the main board (
in the front section of the option module (
Product description
#
"
#
"
). This shows it when it is installed.
#
).
!
), until the
2
2-33
Advertisement
Table of Contents
