Status Displays; Technical Data - Siemens SIMADYN D FM 458 User Manual

Product description

2.4.6 Status displays

There are two LED displays provided under the upper housing cover of
the FM 448 communications expansion module. These provide
information about the actual operating status.
Table 2-21
The green and yellow LEDs are only visible from the top through the
NOTE
cooling slots of the housing.

2.4.7 Technical data

Order No.
Voltage, currents
Dimensions
2-36
LED Status
green dark PROFIBUS not initialized
flashing fatal error:
5 Hz
The error code can be read at function block @CSPRO
and then contact the SIMADYN D Hotline
The connection to the associated CPU module is being
flashing
initialized (@CSPRO): Check the configuring
1 Hz
bright Initialization O.K.
yellow dark No bus operation (initialization phase)
flashing Bus error/fault, e.g. short-circuit:
5 Hz
Check the bus cable and other nodes
flashing COM database not available or inactive when downloading
(only for PROFIBUS)
1 Hz
flashing CFC- and COM configuring do not match:
0.5 Hz
Restricted bus operation possible (only for PROFIBUS)
bright Bus operation O.K.
Status displays of the communications expansion module FM 448
Communications expansion module
EXM 448
Rated voltage
Typical, current drain
Assignment, slots
Dimensions W x H x D [mm]
Weight
Diagnostics information
6DD1607-0EA0
+5 V
0,3 A
1
25 x 290 x 210
0,85 kg
Application Module FM 458 - User Manual
6DD1904-0AE0 Edition 12.2001