Table of Contents
Advertisement
Properties of modules which can be parameterized, can be set using the
Parameterization
appropriate dialog fields. The module type defines which of the
parameters can be set. Before a module can be parameterized, it must be
arranged in the subrack.
A dialog field, with one or several tabs appears by double-clicking on the
line of the subrack with the module. This includes information and the
parameters which can be set for the selected module.
These dialog fields can also be displayed by marking the module and the
menu command „Edit > Object properties" or can be displayed using the
righthand mouse key "Object properties".
Procedure
In order to configure and parameterize the layout, you must make the
following steps in HWConfig:
1. Select the subrack (S7-400 Rack) ; it must have at least one S7 power
2. Select the modules and submodules (FM 458 and components)
3. Parameterize the modules (define the properties)
4. Check configuration consistency
5. Save the configuration
Fig. 4-2
View of hardware configuration man-machine interface (screen)
Application Module FM 458 - User Manual
6DD1904-0AE0
Edition 12.2001
supply unit and one S7-CPU.
Configuring
4-3
Advertisement
Table of Contents
