Omron CS Series Operator's Manual page 93

Debug Console Window
[Console Display Settings]
78
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr
Console Display Settings sets for the CX-Simulator display.
Select Icon Size Select the icon size for the CX-Simulator Debug Con-
·
sole, which will be reflected at the next startup.
Event Action Set for the event action. Checking [Show a viewer
·
automatically for Alarms] will start the Alarm Display
program when an alarm occurs. Checking [Popup a
window automatically for Messages] will automatically
display the Messages window when its contents are
updated.
Alarms Display Specify the application program for the alarm display.
·
Otherwise, the Notepad.exe will be used (OS stan-
dard) for Windows 95 or 98. An application program
can not be specified for Windows NT because the
alarm display is performed only by the event viewer
(OS standard).
Window Position Checking [Always on Top] will display each window for
·
the Debugger in front.
OK Save the present settings and exit the window.
·
Cancel Discard the present settings and exit the window.
·
Section 3-9