Omron CS Series Operator's Manual page 6

Simplified System Exit Processing
Version 1.3
The following functions have been added to the CX-Simulator with the upgrade from Version 1.2 to
Version 1.3.
New PLCs Supported
Starting and Connecting the CX-Simulator from the CX-Programmer
Windows XP Supported
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr
When the system is exited while the CX-Simulator is connected, a confirma-
tion dialog box will appear and, upon confirmation, the CX-Simulator will be
disconnected and the system shut down.
Simulation is newly supported for the following PLCs.
Series
CJ CJ1M-CPU23/22/13/12
New Units in the CS and CJ Series are also supported for PLC Unit registra-
tion.
With CX-Programmer version 3.0 or later, the CX-Simulator can be started
and connected (placed online) from the CX-Programmer. After going online,
program transfer to the CX-Simulator can be started immediately.
CPU Unit model numbers
vii