Omron CS Series Operator's Manual page 261

How to Use Data Trace Recording Tool
Item
Trace status
Elapsed
Trace number
of samples
Saving file
Read settings
button
Save settings
button
Option button
Start button
Stop button
Exit button
Option Settings
Add Recording
Divide
Recording
Add Recording
Divide Recording
Divide Recording not
used
Divide Recording
OK button
Cancel button
246
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr
Display the Trace Status while tracing data.
The time elapsed after execution started in the unit of
hour/minute/second (e.g. 1 hour 10 minutes 30 seconds).
Number of traced samples.
Current file name when Multiple Saving is set.
Read settings from the existing ini file to display it in the window.
Save the settings to the ini file.
Set options regarding the trace data recording.
Change the caption between [Start] when not tracing and [Stop]
when tracing.
Press the [Start] button to start tracing and the [Stop] to stop.
Exit the Data Trace Recording Tool.
Exit the tool after the PLC completes tracing if the PLC is exe-
cuting tracing.
If the file specified by the Trace Data Record File exists, the data will be ap-
pended to the file.
Specify whether the sampling data is to be saved to one file or multiple files.
Save the sampling data to one file, where the tracing ends automatically when
acquired 32,767 samples.
Divide and save the sampling data to multiple files. Change automatically to
the next file when acquired 32,767 samples.
Serial numbers will be attached to the end (excluding an extension) of the
specified file name.
Register the option settings to close the dialog box.
Close the dialog box without registering option settings.
Description
Appendix
Limit of values
OK button
Cancel button