Omron CS Series Operator's Manual page 88

Debug Console Window
Names and Functions
Title bar
Main menu
Icons on the Toolbar
Icons for Execution Operation
The Icons for Debugging Operation
Contents of Main Menu
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr
Name
Title bar
Main menu
Toolbar
Name
Run
(Monitor ode)
Stop
(Program mode)
Pause
Step Run
Continuous Step
Run
Scan Run
Continuous Scan
Run
Scan Replay
Reset
Note Refer to 4-2 Debugging Operation for each execution operation.
Name
Show Step Run
Task Control
I/O Break Condi-
tion Setting
Note Refer to 4 Debugging Programs for each operation.
Name
File
Replay
Help
Function
The title is displayed.
Select a menu.
Click an icon to select a function.
Function
Execute Scan continuously.
Stop the execution. The operation mode for the Lad-
der Engine will become PROGRAM automatically.
Pause the execution. The execution can be resumed
in each execution mode.
Process each step of the mnemonic codes.
Execute Step Run at a fixed interval continuously.
Execute a ladder diagram for a single scan. If Scan
Run is executed during Step Run, the program will be
executed to its end.
Execute Scan Run at a fixed interval continuously.
Return the I/O memory status to the one before the
scan started during Step Run. The program counter is
also cleared.
Reset the hardware and perform the Startup proce-
dure. The power interrupt task is started.
Function
Display the Step Run window.
Display the Task Control window.
Display the I/O Break Condition Setting window.
Function
Display the File menu.
Display the Data Replay menu.
Display the Help information and the version.
Section 3-9
Toolbar
73