Omron CS Series Operator's Manual page 241

I/O Memory Allocation
Address
Words Bits
A512 to
A513
A514
A523
A526 A52600
A52601
A52614
A52615
226
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr
Name
Power In- These words contain the time at
terruption which the power was interrupted.
Time The contents are updated every
time that the power is interrupted.
The data is stored in BCD.
A51200 to A51207:
Second (00 to 59)
A51208 to A51215:
Minute (00 to 59)
A51300 to A51307:
Hour (00 to 23)
A51308 to A51315:
Day of month (00 to 31)
(These words are not cleared at
start-up.)
Number of Contains the number of times
Power In- that power has been interrupted
terruptions since the power was first turned
ON. The data is stored in binary.
To reset this value, overwrite the
current value with 0000.
(This word is not cleared at start-
up, but it is cleared when the
Memory Corruption Detected
Flag (A39511) goes ON.)
Total Power Contains the total time that the
ON Time PLC has been on in 10-hour
units. The data is stored in binary
and it is updated every 10 hours.
To reset this value, overwrite the
current value with 0000.
RS-232C Turn this bit ON to restart the
Port Re- RS-232C port. (Do not use this
start Bit bit when the port is operating in
peripheral bus mode.)
This bit is turned OFF automati-
cally when the restart processing
is completed.
Peripheral Turn this bit ON to restart the
Port Re- peripheral port.
start Bit
SYSMAC Turn this bit ON to restart
BUS Mas- SYSMAC BUS Remote I/O
ter 1 Re- Master Unit 1.
start Bit This bit is turned OFF automati-
cally when the restart processing
is completed.
SYSMAC Turn this bit ON to restart
BUS Mas- SYSMAC BUS Remote I/O
ter 0 Re- Master Unit 0.
start Bit This bit is turned OFF automati-
cally when the restart processing
is completed.
CS/CJ-series PLC
Function
See Func-
tion col-
umn.
0000 to
FFFF
hexadeci-
mal
0000 to
FFFF
hexadeci-
mal
0 to 1: Re-
start
0 to 1: Re-
start
0 to 1: Re-
start
0 to 1: Re-
start
Section 9-3
CX-Simulator
Settings Function
Same as
CS/CJ-series
PLC.
Same as
CS/CJ-series
PLC.
Not used.
Not used.
Not used.
Not used.
Not used.
Settings