Changing Setpoints - Kodak Ektascan 2180 User Manual

User's Manual

Changing Setpoints

This procedure explains how to change processor variables whose setpoints were preset
at the factory. In most cases, factory setpoints will provide optimum film processing.
[1] Press [F4] at the Other Functions Screen to see the Control Processor Screen.
F1
13–14
CONTROL PROCESSOR
Processor Ready
Processor Error: E134
Dev: temp=100.0F
Fix: temp=100.0F
Dry: temp=119.5F
F1 Increase Dry Set
F2 Decrease Dry Set
F3 Setup Processor
F6 Return
Select the desired action.
F2 F3 F4
Set=100.0F
Set=100.0F
Set=120.0F
F5 F6
H126_9057AC
5B9615