Changing Connection From Usb To Wi-Fi - Kodak VERITE Craft 6 Extended User Manual

WPS PIN
1
Click [WPS PIN].
2
Connect up the Unit to your PC.
3
Enter Wireless PIN code password.
4
Click [Continue].
Note(s)
When performing Network connection, make sure the unit
●
is not placed too far away from the access point/router and
the access point/router is powered On and its settings are
correct.
If you need additional help on Network problems, visit our
website at www.kodakverite.com/support
If there are multiple printers on the Network, the window
●
below will appear.
Select your printer's serial number and click [Next].
–
English

Changing connection from USB to Wi-Fi

USB always has priority.
If you would like to change connection from USB to Wi-Fi, refer to
the following instructions.
Microsoft ® Windows
1
Disconnect the USB cable between this unit and your PC
first.
2
From the Windows® start menu, select [All apps] > [KODAK
VERITE CRAFT 6] > [Device setting].
3
Click [Printer re-search] in the [Device setting] window.
4
Change the connection type automatically.
Apple Mac OS
1
Disconnect the USB cable between this unit and your PC
first.
2
Activate [System Preferences].
3
Click [Printers & Scanners].
4
Click [+] > [Add Printer or Scanner...].
23
®
Continued on next page.